Build Your Speaker Cable

4PR new version! now with varistrand conductors!

• 4 Red and 4 Black braided Varistrand conductors
• 2 x 2.08mm2 (approx 13 AWG per +/- leg)
• Special polyethylene dielectric – new colours!
• Low series inductance 0.23uH per metre
• High purity varistrand copper

In 1979 this classic design put KIMBER KABLE on the map and after improvements over time, is still considered the reference for affordable loudspeaker cables. Millions of metres of this remarkable cable have been sold. The construction consists of four red and four black conductors that utilise Kimber's proven braiding technique. Recently upgraded to Varistrand conductors, the aggregate wire size is two x 13 AWG. Even the most basic systems, old and new, will benefit significantly from this legendary performer. With 4PR, the system performs as if costing twice as much. Bass and treble frequencies are allowed their full extension, while dynamics emerge unrestrained. The 4PR is also an excellent cable for professional and studio use due to its inherent ability to reject noise in any cable length.

• 4 White and 4 Clear Braided Conductors
• 2.63mm2 (13AWG)
• Varistrand™ Hyper-pure Copper
• Low loss fluorocarbon dielectric (FEP)

The High Performance Standard. Consisting of eight individual TCSS conductors, four white and four clear that utilise Kimber's proven braiding technique. The insulating dielectric is high pressure-low temperature-extruded FEP. The individual conductors are Hyper-pure copper, arranged in proven VariStrand™ conductor geometry. The aggregate wire size is two 2.63mm2 conductors. The focus, transparency, and transient speed of 4TC are stunning. 4TC continues to receive enthusiastic reviews and recommendations from consumers and critics worldwide.

• 8 Red and 8 Black braided Varistrand conductors
• 2 x 5.27mm2 (10 AWG)
• Special polyethylene dielectric
• High purity copper

For Greater Current Demands. The construction consists of eight red and eight black conductors, arranged in a large format braid. Individual conductors are high-purity copper. The aggregate wire size is two 5.27mm2 conductors. 8PR provides sound that is full bodied and powerful, making it ideal for subwoofers and the low frequency section of biwired speakers as well as full range applications.

Bi-Wire option means the cable braid is split at the speaker end and 2 sets of connectors are used. 4-wires go to the treble/mid connectors and 4-wires go to the bass connectors. Bi-wire adds an extra pair of speaker end connectors.

• 8 White and 8 Clear Braided Conductors
• 2 x 6.62mm2 (9AWG)
• Varistrand™ Hyper-pure Copper
• Low loss fluorocarbon dielectric (FEP)

Legendary Musicality. Consisting of sixteen individual TCSS conductors, eight clear and eight white, arranged in a large format braid. Individual conductors are Hyper-pure copper and utilise Kimber's proven VariStrand™ conductor geometry. The insulating dielectric is a high pressure-low temperature-extruded FEP. The aggregate wire size is two 6.62mm2 conductors. By virtue of its full, accurate and dimensional sound, 8TC ranks as one of the best high-end audio values of all time.

Bi-Wire option means the cable braid is split at the speaker end and 2 sets of connectors are used. 4-wires go to the treble/mid connectors and 4-wires go to the bass connectors. Bi-wire adds an extra pair of speaker end connectors.

• 12 Clear and 12 White Braided Conductors
• Aggregate wire size 2 x 8.36mm2 (2 x 8 AWG)
• Varistrand™ Hyper-pure copper
• Low loss fluorocarbon dielectric (FEP)
• Very low inductance (0.09uH/metre)

Legendary Musicality. Consisting of twenty four individual TCSS conductors, twelve white and twelve clear, arranged in a large format braid. Individual conductors are Hyper-pure copper and utilise Kimber's proven VariStrand™ conductor geometry. The tonal balance of 12TC is full, rich and powerful while the musical impact and dynamics reveal three-dimensionality and imaging.

Bi-Wire option means the cable braid is split at the speaker end and 2 sets of connectors are used. 4-wires go to the treble/mid connectors and 8-wires go to the bass connectors. Bi-wire adds an extra pair of speaker end connectors.