DV 10XA High and Low NEW model – In Stock
- NEW Special annealing magnetic circuit
- magnetic flux damping and softened magnetism
- Neodymium magnet
- Nude Diamond “Shibata III” Line Contact
- Available in both a high output and low output version
- Compatibible with the vast majority of tonearm on the market
The machined aluminum head block ensures a secure, rigid connection to the headshell. With a compliance of 12mm/N and a total weight of 7.5g, the 10XA is compatible with a vast majority of tonearms in the market.The 10XA features a Shibata Type III stylus, known for its superior high-frequency response. The cantilever is made from lightweight, rigid aluminum pipe. This improves groove tracking significantly, enabling higher resolution playback.
The new 10XA incorporates Dynavector’s latest development, a special annealing magnetic circuit. The magnetic circuit, which is the core of an MC cartridge, uses pure iron that has stable magnetic properties with minimal distortion. Furthermore, by performing special annealing that focuses on optimising the magnetic annealing process such as annealing temperature, environment, heating duration, and heating / cooling rates, we have succeeded in delivering expansive resonant sound without distortion and unrivalled resolution.
10XA-H High Output:
Dynavector’s unique coil winding technology made high output MC cartridges possible. By winding an ultra-fine wire many times around the coil bobbin, the phono cartridge can retain a healthy 2.8mV output, eliminating the need for a head amplifier or a step-up transformer. It retains the sonic advantages of an MC cartridge while offering the ease of use of an MM cartridge.
10XA-L Low Output:
The low-output 10XA-L model offers an output voltage of 0.5mV, allowing excellent compatibility with a wide range of step-up transformers and head amplifiers. This model lets you fully experience the distinct qualities of MC playback. Recommended load impedance is 100Ω or higher.
Trade in your old Dynavector cartridge on a brand new, latest model one and receive a substantial discount!
Special Offer: For a limited time, trade in your DV 10X series cartridge on a brand new DV 10XA model and receive the the Full 10XA Trade In Discount. Use the drop down list box above to see trade in options. Also see our FAQ’s on Dynavector Trade Ins. FAQ link at bottom of this page or in “About” tab at top of page and you can contact us anytime for more help.
| Model | High Output | Low Output |
|---|---|---|
| Type | High output moving coil cartridge with flux damper and neodymium magnet | Low output moving coil cartridge with flux damper and neodymium magnet |
| Output voltage | 2.8 mV (at 1kHz 5cm/sec) | 0.5 mV (at 1kHz 5cm/sec) |
| Tracking force | 1.8 – 2.2 g | 1.8 – 2.2 g |
| Impedance | 150 ohms | 32ohms |
| Recommended load impedance |
>1,000 ohms | >100 ohms |
| Channel separation | 25dB (at 1kHz) | 25dB (at 1kHz) |
| Channel balance | 1.0 dB (at 1KHz) | 1.0 dB (at 1KHz) |
| Frequency response | 20 – 20,000 Hz（±2dB) | 20 – 20,000 Hz（±2dB) |
| Compliance | 12 mm/N | 12 mm/N) |
| Cantilever | 6mm length hardened aluminium pipe | 6mm length hardened aluminium pipe |
| Stylus | Nude Diamond “Shibata III” Line Contact | Nude Diamond “Shibata III” Line Contact |
| P75 PE Mode setting | n/a | High R |
Reviews
There are no reviews yet.