Dynavector DV DrT XV1s

$6,889.00

SKU: DV DRT XV1S Category:

Description

DV DRT XV1s

  • 8 small Alnico magnets
  • magnetic stabilising coils are wound on the front yokes
  • square shaped front aperture with a matching square shaped armature

 

The original XV-1 cartridge was designed to take the reproduction of analogue recording to new heights. The XV-1 achieved a standard of performance that was clearly in a league of its own. Dynavector have always remained indifferent to the endless digital formats that proport to be the next breakthrough in music reproduction, safe in the knowledge that the vast heritage of music recorded on vinyl can easily equal, if not clearly out perform these new formats. Dynavector are seriously committed to ensure the vinyl enthusiast is well catered for and the XV-1s is further proof of this on going commitment; yet another ground breaking product, uniquely Dynavector and flagship of the brilliant Dynavector cartridge range.

Dynavector continue to research and have pushed the boundary further with the NEW XV-1s. Although the specifications remain the same a significant upgrade in both magnetic and body parts achieve a startling improvement in imaging, along with a smooth as silk extension over the entire frequency range.
 

Principal Improvements

The XV-1s is the latest evolution of Dynavector design and features the advanced multi magnet design that stabilizes the magnetic flux density between the front yoke and the equalizer component, around the air gap.

The XV-1s also features a revolutionary square shaped front aperture with a matching square shaped armature this enables the moving coil wound armature to move in an equalized and stable magnetic flux.

Although slightly smaller in dimension the front yoke aperture is also square shape to match the armature along with a square shaped counterbore to the equalizer component part.

front yoke of XV-1s MC Cartridge?square shaped counterbore of XV-1s MC Cartridge
  • The material used to stabilize the magnets is African ebony wood. It contributes to the best balance to the sound character.

Other features

  • 6mm length 0.3 mm dia. solid boron is used.
  • 30 micron PCOCC wiring coil is used.
  • 6 ohms impedance is suitable with most phone stages or step -up transformers.
  • New stylus guard is now available.
stylus guard of XV-1s MC Cartridge?stylus guard of XV-1s MC Cartridge

Construction

Parts name of XV1 MC Cartridge


Dimensions of XV1 MC CartridgeTrade in your old Dynavector cartridge on a brand new, latest model one and receive a substantial discount!
Contact us for more details on the trade-in scheme.

 

Type  Low output moving coil cartridge with Multi alnico magnets and Flux damper
Output Voltage  0.3mV (at 1KHz, 5cm/sec.)
Channel Separation  30 dB (at 1KHz)
Channel balance  1.0 dB (at 1KHz)
Frequency response  20 – 20,000Hz (± 1dB)
Compliance  10 x 10-6 cm/dyn
Tracking force  1.8 – 2.2 grams
Impedance  R=6 ohms, L=18 micro Henry
Recommended load
resistance
 > 30 ohms
Cantilever  6mm length 0.3 mm dia. solid boron
Stylus  0.14 x 0.08 mm Line contact PF
Weight  12.6 grams

 

 

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “Dynavector DV DrT XV1s”

Your email address will not be published. Required fields are marked *

preloader